IT-180 High Reliability Lead-Free PCB with High Tg and Thermal Performance (0.6mm-3.2mm Thick)
(All PCBs are custom-manufactured. Reference images and parameters may vary based on your design requirements.)
Brief Introduction
IT-180ATC is an advanced high-Tg (175°C by DSC) multifunctional filled epoxy material known for its high thermal reliability and CAF resistance. This PCB is suitable for a variety of applications, capable of withstanding lead-free assembly temperatures of up to 260°C. The thickness ranges from 0.5 mm to 3.2 mm, with copper weights varying from 0.5 oz to 3 oz.
.JPG)
Applications
Automotive: Ideal for engine room ECU applications.
Multilayer and HDI PCB: Suitable for complex circuit designs.
Backplanes: Designed for high-performance backplane applications.
Data Storage: Used in data storage systems.
Server and Networking: Meets the demands of server and networking equipment.
Telecommunications: Ideal for telecom devices.
Heavy Copper: Supports heavy copper applications.
Key Features
Low CTE: Ensures dimensional stability.
High Heat Resistance: Suitable for demanding thermal environments.
Excellent CAF Resistance: Reduces the risk of conductive anodic filament failures.
Good Through-Hole Reliability: Enhances durability and performance.
Our PCB Capability (IT-180ATC)
| Our PCB Capability (IT-180ATC) | |
| PCB Material: | High Tg, Lead Free High Reliability Epoxy Resin |
| Designation: | IT-180ATC |
| Dielectric constant: | 4.4 at 1GHz |
| Layer count: | Double Layer, Multilayer, Hybrid PCB |
| Copper weight: | 0.5oz (17 µm), 1oz (35µm), 2oz (70µm), 3oz (105µm) |
| PCB thickness: | 0.6mm, 0.8mm, 1.0mm, 1.2mm, 1.6mm, 1.8mm, 2.0mm, 2.4mm, 3.0mm, 3.2mm |
| PCB size: | ≤400mm X 500mm |
| Solder mask: | Green, Black, Matt Black, Blue, Matt Blue, Yellow, Red, Purple etc. |
| Surface finish: | Bare copper, HASL, ENIG, OSP, Immersion tin, Immersion Silver, ENEPIG, Pure gold etc.. |
| Technology: | HDI, Via in pad, Impedance Control, Blind via/Buried via, Edge Plating, BGA, Countsunk Holes etc. |
.JPG)
General Properties of IT-180ATC
| General Properties | |||
| Items | IPC TM-650 | Typical Value | Unit |
| Peel Strength, minimum | 2.4.8 | lb/inch | |
| A. Low profile copper foil | 5 | ||
| B. Standard profile copper foil | 8 | ||
| Volume Resistivity | 2.5.17.1 | 1x109 | M-cm |
| Surface Resistivity | 2.5.17.1 | 1x108 | M |
| Moisture Absorption, maximum | 2.6.2.1 | 0.1 | % |
| Permittivity (Dk, 50% resin content) | -- | ||
| A. 1MHz | 2.5.5.9 | 4.5 | |
| B. 1GHz | 2.5.5.9 | 4.4 | |
| Loss Tangent (Df, 50% resin content) | -- | ||
| A. 1MHz | 2.5.5.9 | 0.014 | |
| B. 1GHz | 2.5.5.9 | 0.015 | |
| Flexural Strength, minimum | N/mm2 | ||
| A. Length direction | 2.4.4 | 500-530 | |
| B. Cross direction | 410-440 | ||
| Thermal Stress 10 s at 288°C | |||
| A. Unetched | 2.4.13.1 | Pass | Rating |
| B. Etched | Pass | ||
| Flammability | UL94 | V-0 | Rating |
| Comparative Tracking Index (CTI) | IEC 60112 / UL 746 | CTI 3 (175-249) | Class (Volts) |
| Glass Transition Temperature(DSC) | 2.4.25 | 175 | ˚C |
| Decomposition Temperature | 2.4.24.6 | 345 | ˚C |
| X/Y Axis CTE (40℃ to 125℃) | 2.4.41 | 11-13 / 13-15 | ppm/˚C |
| Z-Axis CTE | |||
| A. Alpha 1 | 45 | ppm/˚C | |
| B. Alpha 2 | 2.4.24 | 210 | ppm/˚C |
| C. 50 to 260 Degrees C | 2.7 | % | |
| Thermal Resistance | |||
| A. T260 | 2.4.24.1 | >60 | Minutes |
| B. T288 | 20 | Minutes |